Odroid 3.5inch Touchscreen Shield Standart

AÇIKLAMA

480x320 piksel TFT LCD ve dirençli dokunmatik kaplamaya sahip, tamamen monte edilmiş 3,5 inç ekran. ODROID-C2/C1+/C0'ın üstüne takmanız yeterli.

ODROID-XU4'ün bu ekranı kullanabilmesi için Shifter-Shield kartına ihtiyacı var.

Yapılandırmak için resmi bir Ubuntu görüntüsüne ihtiyacınız olacak.

Çekirdek güncellemelerini kolayca indirebilir (dağıtım yükseltme yoluyla) ve ODROID'nizi bu ekran kalkanı için yapılandırabilirsiniz.

Özellikler

Fully assembled 3.5inch display with 480x320 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C2/C1+/C0.
ODROID-XU4 needs the Shifter-Shield board to use this display.

You will need an official Ubuntu image to configure it. 
You can simply download the Kernel updates (via dist-upgrade) and configure your ODROID for this display shield. 

Please follow the step by step guide from the WiKi. If not, the display doesn't work.

<a data-cke-saved-href="http://www.hardkernel.com/main/products/=" href="http://www.hardkernel.com/main/products/=" target="_blank" prdt_info.php?g_code="G143556253995" www.hardkernel.com=" "=" style="color: rgb(85, 85, 85); text-decoration: none;">http://odroid.com/dokuwiki/doku.php?id=en:3.5inch_lcd_shield

Note: this display is NOT compatible with Android platform.
 

BOARD DETAIL

You can place the RTC Shield on the bottom side of the LCD Shield PCB. The RTC Shield must be purchased separately.

Specification   LCD Type TFT LCD Interface Parallel 8-bit Touch Screen Resistive Touch Screen Controller SX865X (I2C) LCD Active Area 48.96(H) x 73.44(V)mm Backlight LED Resolution 480 x 320 pixels LCD Controller ILI9488 Board Size 56(H) x 95(V) x 17(T)mm Weight 54g

* Limitations  - GPU/VPU Hardware acceleration required OpenGL-ES and Video playback are not supported. - The frame rate is around 10~15FPS due to slow GPIO toggling speed.

Special Case for the Shield