Plus'ı Keşfet YENİ
    Sepetim

    Odroid I2S 2Watt Stereo Boom Bonnet Kit + 12 pin GPIO ribbon cable for XU4 Standart

    Domirobot
    Odroid I2S 2Watt Stereo Boom Bonnet Kit + 12 pin GPIO ribbon cable for XU4 Standart
    Odroid I2S 2Watt Stereo Boom Bonnet Kit + 12 pin GPIO ribbon cable for XU4 Standart
    Tüm Ürün Açıklamasını Gör

    1.280,36 TL

    SEPETTE
    1.216,35 TL

    Satıcı: DomiRobot

    10.0

    Mağazaya Git

    Diğer Arduino Parçaları ve Setleri Ürünleri

    Tüm Domirobot Ürünleri

    Ürün Açıklaması

    AÇIKLAMA


    XU4, C2 ve C1+ için en yeni Android ve Ubuntu işletim sistemiyle test edilmiştir. Herhangi bir lehimlemeye ihtiyacınız yok. Kullanmaya hazır.

    İşletim sisteminizin eski bir sürümüne sahipseniz önce onu en son sürüme güncelleyin.


    Özellikler

    I2S 2Watt Stereo Boom Bonnet Kit


    Tested with the latest Android and Ubuntu OS for XU4, C2 and C1+. You don't need any soldering. It is ready to go. 

    If you have old version of OS, update it to the latest version first. 

    This uses I2S as digital sound standard for audio output. 
    It is super easy.  You'll be rockin' out in 15 minutes.
    step1. Plug 2 x 2 Watt 4 ohm stereo speakers to the connector on the Boom Bonnet board and attach them with sticky glue. 
    step2. Connect the GPIO ribbon cable one side to the boom bonnet board and the other side to ODROID board. 
    step3. Update the OS to the latest version. 

    You can easily adjust the audio output level with a potentiometer on the board.

    Enjoy the stereo BOOM sound! 

    A detail WiKi page for Software settings and Hardware schematics

    Package include
    - Stereo Boom Bonnet board
    - 2 x 2Watt / 4 ohm mini speakers (28mm diameter, 11.5mm thickness)
    - 3 x 5mm PCB spacers
    - 3 x 5mm screws

    and select one GPIO cable for your ODROID
    - 7 pin GPIO ribbon cable(200mm) for C1+ / C2  or
    - 12 pin GPIO ribbon cable(200mm) for XU4
     
    Board Detail

    boombonnetBoardDetail.jpg

    Make a stereo quality sound system with ODROID-VU7
    - I2S 2Watt Stereo Boom Bonnet Kit
    - 7 pin GPIO ribbon cable
    - ODROID-C2
    - ODROID-VU7
    - MicroSD Card
    - 5V/4A PSU
    201707260322439324.jpg

    Connect the I2S 7pin cable
    boombonnetC27pincable.jpg
     
    with ODROID-C2
    201707260351320088.jpg
     
    with ODROID-XU4
    Make a game station turbo system with ODROID-VU7
    - I2S 2Watt Stereo Boom Bonnet Kit
    - 12 pin GPIO ribbon cable
    - ODROID-XU4Q
    - ODROID-VU7
    - 8GB MicroSD Card installed Game Station Turbo
    - 5V/4A PSU
    boombonnetXU4.jpg

    System noise can be heard from the speakers and the earphone jack. 
    Don't expect HiFi-grade clear sound.
     
    Power consumption : 500mA/5V

    Ürün Özellikleri